Awhile back, I found an accent table I liked at Target. It was a bit dark for my taste, but I needed something that would spruce up a corner in our living room. So I sprung on this dark wood, modern table and added accessories over time:
Looks decent, but it was just sucking up tons of natural light that we couldn’t afford to lose. I decided to play around a little bit.
I took of the front drawers and unscrewed the hardware. Oh, I should mention that my FIRST attempt to lighten this piece was to spray the hardware gold, to match some various accents on the table already (like the picture frame, the vase and the mirror). And it was a good attempt, but it wasn’t enough!
I brought the two drawers to the garage and used 60 grit sandpaper on a palm sander to get the darkness off. Then I went over that with 150 grit. I would have used 3 different grits and ended with a higher (like 180 grit) finish, but I felt that it was sufficiently smooth with what I had available. Once it was sanded I used odorless mineral spirits and rag to wipe off the dust and debris leftover on the drawer front.
Once the drawer fronts had “dried” (the wet look that the mineral spirits left) it was time for primer and paint. I usually use Kilz Primer. We pick up a big bucket at Home Depot whenever we’re low. Then I went over it with Behr Ultra Pure White in a semi-gloss finish (which was left over from another project). I trial-ed a foam roller this time around while painting, and I must say: I will never go back! They are perfect for a smooth surface. Probably would have looked even more amazing with self-leveling paint. Next time…
I popped the hardware back on after everything had dried nicely. And I’m VERY happy with the results.
It’s like a brand new piece of furniture! Very awesome DIY for cheap. What is everyone else working on? Anyone updating with paint?